 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Right Angle Lens 12-215/BHC-YLMQY/3C Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain with in RoHS compliant version. Descriptions The 12-215 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Part No. 12-215/BHC-YLMQY/3C Chip Material InGaN Emitted Color Blue Resin Color Water Clear Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 1 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C Package Outline Dimensions C L 1.7 2.1 R0.5 0.5 1.0 0.6 C L 0.8 Cathode Mask 1.3 0.8 0.3 1.5 0.3 Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 0.35 0.9 Page: 2 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation ElectrostaticDischarge(HBM) Operating Temperature Storage Temperature Soldering Temperature Symbol VR IF IFP Pd ESD Topr Tstg Tsol Rating 5 25 100 110 150 -40 ~ +85 -40 ~ +90 Reflow Soldering:260 for 10 sec Hand Soldering:350 for 3 sec Unit V mA mA mW V Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current Symbol Iv 21/2 p d VF IR Min. 11.5 ------470.0 ---2.70 ---- Typ. ----130 468 ----35 ------- Max. 28.5 ------475.0 ---3.20 50 Unit mcd deg nm Condition IF=5mA nm nm V A VR=5V Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 3 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C Bin Range Of Dom. Wavelength Group Y Bin Y Min 470.0 Max 475.0 Unit nm Condition IF=5mA Bin Range Of Luminous Intensity Bin L M Min 11.5 18.0 Max 18.0 28.5 Unit mcd Condition IF=5mA Bin Range Of Forward Voltage Group Bin 29 30 Q 31 32 33 Min 2.70 2.80 2.90 3.00 3.10 Max 2.80 2.90 3.00 3.10 3.20 V IF=5mA Unit Condition Notes: 1.Tolerance of Luminous Intensity 11% 2.Tolerance of Dominant Wavelength 1nm 3.Tolerance of Forward Voltage 0.05V Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 4 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 5 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 6 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 7 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile or less and 60% RH or less. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 8 of 10 Prepared by:Zhouhua EVERLIGHT ELECTRONICS CO.,LTD. 12-215/BHC-YLMQY/3C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No : DSE-125-B07 http://www.everlight.com Prepared date: 27-Oct-2007 Rev.2 Page: 9 of 10 Prepared by:Zhouhua |
Price & Availability of 12-215-BHC-YLMQY-3C
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |